5 Easy Ways to Clear Toilet Blockages

One of the most reliable tools for dealing with a clogged toilet is the humble plunger. It’s effective, affordable, and can solve many toilet blockages. If you’re wondering how to unblock a toilet quickly, a plunger is often the answer.

Here’s how to do it:

• First, make sure the plunger is fully submerged in the water. If the water level is too low, add some more until it covers the head of the plunger.
• Position the plunger over the drain hole, ensuring it creates a tight seal.
• Firmly press down and pull up, creating a vacuum. Repeat this motion several times, ensuring the pressure helps break up the blockage.
• Flush to see if the water drains. If it doesn’t, repeat the process until the clog clears.

A plunger is usually the best tool for minor blockages. However, if your clogged toilet persists, you may need to consider using a different method or getting a help from an expert toilet repairs Melbourne.

If you don’t have a plunger handy, another effective and natural solution to fix a blocked toilet is to use baking soda and vinegar. This combination is known for its power to break down clogs.

Here’s how to unclog a toilet with this method:

• Pour about one cup of baking soda directly into the toilet bowl.
• Follow it up with two cups of vinegar. Let the mixture sit for about 30 minutes. You’ll notice some fizzing action, that’s the natural reaction breaking down the clog.
• After 30 minutes, try flushing the toilet. The chemical reaction will have loosened the debris, and the water should flow more easily.

This method works best for organic clogs caused by waste or toilet paper. If you’re dealing with tougher blockages, you may need to escalate the situation and call for a plumber on toilet repairs Melbourne.

For more stubborn blockages, a toilet auger is a highly effective tool. Often referred to as a plumbing snake, this device is designed to reach deep into your toilet plumbing to break apart or dislodge the clog. It’s a step up from the plunger and works wonders when you’re wondering how to fix a blocked toilet that won’t budge with other methods.

To use a toilet auger:

• Insert the end of the auger into the toilet bowl and begin rotating the handle.
• Push the auger down the drain while continuing to rotate it. As it goes further into the pipe, it will either break apart the blockage or grab onto it, allowing you to pull it out.
• Once you feel resistance or the auger has snaked its way through the blockage, carefully retract it.
• Flush the toilet to see if the water drains properly. If necessary, repeat the process until the clog is fully cleared.

Toilet augers can handle much tougher clogs and are a great investment for any homeowner. They’re widely available at most hardware stores and are typically a good solution if you’re asking yourself how to unclog a toilet.

When you’re dealing with a clogged toilet caused by grease, waste buildup, or hardened toilet paper, dish soap and hot water can help loosen up the blockage. The soap lubricates the pipe, while the hot water helps dissolve the clog, making it easier to clear.

Here’s how to do it:

• Pour about a half cup of dish soap into the toilet bowl. Allow it to sit for 10-15 minutes, giving it time to break down the clog.
• After the soap has had time to settle, slowly pour a bucket of hot (but not boiling) water into the toilet from waist height. The force will help push the clog down while the soap softens it.
• Let it sit for an additional 30 minutes.
• Flush to see if the water drains freely. If not, you may need to try one of the other methods mentioned or call a professional for toilet repairs.

This method works particularly well when you’re looking for an inexpensive way to clear up a clogged toilet without resorting to harsh chemicals or expensive tools.

If you have a wet/dry vacuum handy, this tool can be surprisingly effective for clearing a clogged toilet. While it’s often used for cleaning purposes, its powerful suction can also help remove the blockage from your toilet. Just be cautious, as this method can be a little more involved and requires some preparation.

Here’s how to do it:

• First, make sure your vacuum is set to handle liquids. Check the settings to ensure it’s prepared for wet suction.
• Position the vacuum hose as close to the drain hole as possible. You may need to create a seal around the hose to ensure the suction is as effective as possible.
• Turn on the vacuum and let it run for a few minutes. The powerful suction should pull the clog into the vacuum’s container.
• Afterward, check the toilet to see if the water drains properly. If the clog is still present, repeat the process until the toilet flows freely.

Using a wet/dry vacuum can be a bit tricky, so take care to avoid any mess. But it’s an excellent option if you need to address a stubborn clog and don’t want to wait for a support from plumber Melbourne.

A clogged toilet doesn’t have to be a cause for panic. With these five easy methods, you can quickly address a blocked toilet without needing to call a plumber. However, if the problem persists, don’t hesitate to call a professional to ensure your toilet plumbing is functioning as it should. Remember, it’s always a good idea to prevent clogs before they occur. Be mindful of what goes down your toilet and avoid flushing non-flushable items.

If you’re ever unsure or dealing with a persistent blockage, professional toilet repairs Melbourne and toilet plumbing services are just a phone call away. At Flowsafe Plumbing, we’re always here to help Melbourne residents with their toilet and plumbing issues, providing prompt, reliable, and expert service every time.

Need help with a blocked toilet? Don’t wait until it gets worse! Call us now at 0489 982 138 or visit our enquiry page to schedule a service for our fast, reliable, and professional toilet repairs. Let us handle your toilet plumbing needs so you can get back to your day!